An image purporting to come from the manufacturers Apple Catcher Technology describes the body of the iPhone 7 shows a design similar to the iPhone 6s. In line with the other rumors, the picture shows a limited band antennas on the sides and top of the unit, not the entire back covered.
There seems to be a larger hole for the camera, which may or may not stand out a bit. Some rumors have the iPhone is proposed 7 camera did not stand out, but others disagree. It seems that if there is a bulge, is less obvious than the camera bump on the iPhone 6s. The Catcher image also appears to describe any device that is much thinner, casting some doubt on rumors suggest iPhone up to seven millimeters thinner than 6s iPhone and iPod touch could be as thin as 6.1 mm.
Nowhereelse.fr Steve inhibitors Stoffer create renderings camera-based image, which can be seen below. While the iPhone is said 7 to have a single camera, as shown, iPhone 7 Plus rumored to have a dual-camera design.
Field & People, a company that created a cage of luxury for the iPhone that have leaked images of what the iPhone 7 Plus used (in the picture above) to create a series of rendering detail that a clearer picture might look from what is the larger screened.
Rendering describes the phone is thinner than the iPhone 6s with dual camera tripod and SmartConnector than the iPad Pro.
Overall, the device looks a lot like the iPhone 6s. No design changes including rear antenna tape, but there continues to be a band at the bottom and to be the sides. Volume buttons, mute switch, and the power button remain unchanged. It is unclear whether this is the actual design of the iPhone, but it is a possibility and the rumors in the queue.
case for iPhone 7 was released in March, appears to be similar to the overall design to the iPhone 6s. The same features volume buttons and the power button shaped pill lying side, but it has cutouts for the two speakers, in accordance with one of the rumors suggest that iPhone have 7 stereo speakers.
Two-piece speaker to replace the pieces to the headphone jack, which are allegedly knocked to support port Lightning iPhone 7 all-in-one.
IPhone 7 cases compared with the iPhone 6s on YouTube, and while parents the unit fit into the case of the iPhone 7 (indicating a new phone will not be dramatically thinner), there are some differences. IPhone 7 cases seem a larger opening for the camera to have, which can be configured single-lens cameras are larger to take on the iPhone. 7
Since the iPhone 6s almost perfectly into the iPhone case fits 7, it is possible that it will not be quite as thin, as some rumors suggested.
Early case for the new devices is often based on a system derived from factory workers and other insider sources and can provide a good overview of the design of the next iPhone, but they are not exactly 100 percent of the time.
Japanese magazine published photos MacFan design of the iPhone 7 Plus, which is with the rumors in line that the iPhone 7 and 7 Plus is the largest part of the same design as the iPhone 6s and 6s are with Plus. Schema that describes the 5.5-inch iPhone, said the iPhone 7 Plus to 158.22mm x 77.94mm x 7.3mm is measured, is identical to the dimensions of the iPhone 6s Plus.
Image Design is also rumored dual-camera setup, the iPhone 7 Plus and no headphone jack. Not in the picture is the second speaker to replace the headphone jack, which does not with some rumors suggesting stereo sound disagree are the features that are included.